Dampstop Mesh Membrane

Dampstop Mesh Membrane




Wykamol Dampstop Mesh Membrane is manufactured from High Density Polyethylene (HPDE). . It is impermeable and resistant to the usual chemicals in the building construction. Studs are formed in a regular pattern on the one face of the product, and a polypropylene mesh on the other side. The studs are spaced at approx. 25mm centres in both directions. Standard roll length is 20m.


Wykamol Dampstop Mesh Membrane is tough but pliable and can be easily cut with a knife or scissors.


Rolls of the product should be stored upright when stored over long periods, and preferably under cover.

Chemical Resistance

The product is resistant to all chemicals, to which it can be exposed, in normal building construction. A small number of aggressive chemicals (e.g. solvents), in large concentrates, can to some extent attack the product during prolonged exposure. For special applications, the supplier should be contacted, with a view to assessing necessary action.

Installation Instructions

Lengths of Wykamol Dampstop Mesh membrane to be butt jointed and sealed using Wykamol Overseal tape. Fixing and other jointing as per Wykamol Membrane Systems.


Damp proof membrane for walls suitable for rendering, plastering or dot n dab dry lining.


Page updated 16th Aug 2016, 09:51
  • Video
  • CPD Seminars
  • Downloads
  • The Children’s Air Ambulance
  • Basement Waterproofing Association
BRICK | instant websites
Web design by Brick technology Ltd.