MAGNAS­TAN­DARD™ 200 sewage system

MAGNASTANDARD™ 200 sewage system

Description

MAGNASTANDARD™200 sewage system

Range of packaged units for collection and automatic pumping of foul water or groundwater.

  • Polyethylene tank requires site drilling for connections to suit application.
  • Supplied with pedestrian duty cover. Can be adapted for roadway applications using covers by others.
  • Vertical output: 8–12.5 m.
  • Horizontal output: 70–150 m.
  • Flow rate (maximum): 180–450 L/m.
  • Requires 230V AC fused electrical supply.
  • Requires level concrete base and concrete backfill.

More about MAGNASTANDARD™200 sewage system


Product reference: MAGNASTANDARD™200 sewage system .
Type: [Magna 150 Standard]
[Magna 200 Standard]
[Magna 360 Pro]
[Magna 360 Pro Twin]
Access cover: [As supplied]
[2903, locking, inlay, 600 x 450 mm]
-
For Magna 150 Standard, Magna 200 Standard, Magna 360 Pro or Magna 360 Pro Twin.
[7070, locking, heavy duty, 600 x 450 mm]
-
For Magna 150 Standard, Magna 200 Standard, Magna 360 Pro or Magna 360 Pro Twin.
[Cover specified elsewhere, with ___ mm thick overslab]
- Maximum 300 mm slab depth.
Pipe: [3078, MDPE pipe]
-
For Magna 150 Standard.
[3081, 63 mm MDPE pipe]
-
For Magna 150 Standard, Magna 200 Standard, Magna 360 Pro or Magna 360 Pro Twin.
Alarm: [2130, high water level alarm]
-
Mains operated. For Magna 150 Standard or Magna 200 Standard.
[4053, high water level alarm]
-
Mains or battery operated. For Magna 150 Standard, Magna 200 Standard.
Accessories: [1205, kiosk control panel housing]
-
For Magna 360 Pro or Magna 360 Pro Twin.
[8001, rubber wall seal 110 mm]
-
For Magna 150 Standard, Magna 200 Standard, Magna 360 Pro or Magna 360 Pro Twin.
[9089, rubber wall seal 110 mm]
-
For Magna 150 Standard or Magna 200 Standard.

Standard Product Features

General:

  • Vertical output (maximum): 11 m.
  • Horizontal output (maximum): 100 m.
  • Flow rate (maximum): 600 L/m.
  • As standard: 9018 tank, 2900 access cover, 4088 pump, 9067 nonreturn valve, 9070 gate valve, 3094 compression fitting, 8001 rubber wall seal, 50 mm rubber wall seal
  • 50 mm cable duct connector. 50 mm vent duct connector.
  • Internal dimensions (w x l x h): 700 x 550 x 900 mm.
  • External dimensions (w x l x h): 850 x 700 x 1050 mm.
  • Discharge: 63 mm.
  • Submersible pump: 7.3 A, 1100 W.

Installation:

  • Base: 200 mm consolidated hardcore. 150 mm mass concrete, grade 25 (minimum), to suit ground conditions.
  • Discharge pipe connector: Use with MDPE (medium density polyethylene), or HDPE (high density polyethylene) discharge pipes.
  • Vent duct connector: Provide vent to atmosphere (without valve) where incoming waste is not vented.
  • Requires concrete backfill after installation.
  • Where a concrete overslab is used, it should be designed to distribute applied loads away from the tank.
Product code: DRAINFLO200
Colour: White
Page updated 31st Jul 2013, 11:52
  • Video
  • CPD Seminars
  • Downloads
  • The Children’s Air Ambulance
  • Basement Waterproofing Association
BRICK | instant websites
Web design by Brick technology Ltd.