Stabiliser Primer

Description

Wykamol Stabiliser Primer is a combined stabiliser, sealer and permanent algaecide/fungicide which will sterilise and stabilise external masonry and many other surfaces. Wykamol Stabiliser Primer is a liquid product in a hydrocarbon solvent and is easily applied by brush.

It has been designed to penetrate deep into the substrate in order to “bond” powdery surfaces, thus presenting a stable surfaces of even porosity for decoration.

The cyclic low toxic biocide contained in Wykamol Stabiliser Primer will kill all spores within the masonry surface which can cause premature loss of adhesion and flaking of any new paint coatings.

Wykamol Stabiliser Primer will provide continuous protection against all spores within the surface.

Scope

One coat of Wykamol Stabiliser Primer is all that is normally required and this coating provides an alternative to a fungicide and priming coat treatment.

Wykamol Stabiliser Primer penetrates deep into the substrate producing a more permanent protection against the re-growth of spores within the surface.

Wykamol Stabilser Primer can be applied to the following surfaces provided they are clean and dry. CEMENT PAINT, CEMENT RENDERING, ROUGHCAST, CONCRETE & BRICKWORK.

Wykamol Stabiliser Primer although designed for external use can be used for binding down internal surfaces which are powdery, such as old Lime Wash, Friable Plaster & Whitewash.

Downloads

Stabiliser Primer Product Guide January 2009

9b Stabiliser Primer MSDS May 2011