Ultracure Damp Proofing Kits

Ultracure Damp Proofing Kits

ULTRACURE is a BBA APPROVED unique silicone emulsion cream for injection into brickwork etc. for the control of rising dampness. Ultracure can be used in all types of masonry without the use of high pressure equipment

ULTRACURE is a BBA APPROVED unique silicone emulsion cream for injection into brickwork etc. for the control of rising dampness. Ultracure can be used in all types of masonry without the use of high pressure equipmentULTRACURE is a BBA APPROVED unique silicone emulsion cream for injection into brickwork etc. for the control of rising dampness. Ultracure can be used in all types of masonry without the use of high pressure equipment

Description

Special Properties

  • fast, clean installation;
  • no high-pressure injection pump required;
  • virtually odourless, low hazard;
  • precise dosing;
  • no pump cleaning required between jobs;
  • Approved by the British Board of Agrément.

ULTRACURE is a BBA APPROVED unique silicone emulsion cream for injection into the mortar course etc. for the control of rising damp. Ultracure can be used in all types of masonry without the use of high pressure equipment.

The cream is delivered by hand pressure only from a simple displacement pump and injector lance into a series of holes drilled into the mortar course. From here it migrates rapidly into the masonry pores where the injection cream reverts to a liquid phase and polysiloxanes are formed in situ.

During the curing period a low molecular-weight silane vapour is also produced giving excellent migration through the wall. Curing of the DPC starts immediately with the final cure taking 2 - 6 weeks depending on wall thickness.

Extensive field experience with this technology demonstrates that Ultracure™ will perform as well as any conventional liquid injection system against rising damp.

Page updated 15th Oct 2014, 10:08
  • Video
  • CPD Seminars
  • Downloads
The children’s air ambulance
BRICK | instant websites
Web Design Lancashire by Brickweb