The Wykamol Group range of surface treatment products includes many that are
applied as surface coatings etc. to give protection to masonry.
EPOXY FLOOR COATING EP40 - A two part, water dispersed epoxy coating for new
or existing concrete floors. Once cured the floor seal gives a hard wearing
finish exhibiting excellent chemical resistance to most dilute alkalis,
detergents, grease, animal fats and food product.
Pack size : 5 litres
Product Codes: WYKEP40C (Colour: CLEAR) / WYKEP40G (Colour:
GREY)
PRODUCT GUIDE HEALTH AND SAFETY DATA SHEET BASE HEALTH AND SAFETY DATA SHEET HARDENER
TECHNOSEAL DPM An SBR latex-based liquid
damproofing paint for water proofing applications. The paint dries to form a
tough semi-gloss finish. Can be applied to walls under render or plaster as a
water barrier.
Pack Sizes: 5 litres / 10 litres
Product codes: TECHSEAL5-5L (5 litres BLACK) /
TECHSEBK-10L (10 litres BLACK) TECHSEWT5-5L (5
litres WHITE) TECHSEWT-10L (10 litres WHITE)
ENVIROSEAL is an effective water
repellent liquid based on a solvent free silicone/siloxane emulsion for use
above ground on porous brickwork, cement renders, asbestos, cement/mineral
boards, unglazed tiles, cast concrete, roughcase, stonework (including
calcareous materials ie those containing limestone) wood, canvas and leather.
Product is supplied ready to use.
Pack sizes: 5 litres / 25 litres
Product codes: ENVIRO5LT / ENVIRO25LT
ENVIROSEAL CONCENTRATE - is an effective water repellent
liquid based on a solvent free silicone/siloxane emulsion for use above ground
on porous brickwork, cement renders, asbestos, cement/mineral boards, unglazed
tiles, cast concrete, roughcase, stonework (including calcareous materials ie
those containing limestone) wood, canvas and leather. Product makes 25
litres.
Pack size: 2 litres. Product code: ENVCONC
ENVIROSEAL PLUS - with its unique thixotropic consistency and
excellent water-repellant properties on a range of building materials,
Enviroseal Plus stands out. As opposed to conventional liquid products,
Enviroseal Plus can be applied in just one working operation to achieve the
desired loadings for maximum efectiveness.
Pack size: 5 Litres. Product code: ENVPLUS
SALT NEUTRALISER - An aqueous solution based on acetic acid
with a surfactant, has been specifically developed to overcome the problem of
salts in mineral building surfaces and is suitable for a wide range of
substrates from new plaster to old stonework.
Pack size: 5 litres. Product Code: SNEUT
WYKABOR 10 - Aqueous boron based masonry biocide based on
disodium octaborate and benazalkonium chloride. Suitable for spray / brush
application, for the control and prevention of mould, algae, mosses and litchens
from interior/exterior surfaces.
Pack size: 25 litres Product Code: WYKBOR1025LT
MICROTECH BIOCIDE - a unique formulation containig 'polyphase' for the
control and prevention of moulds, algae, mosses and litchens from interior /
exterior sufaces. Pack dilutes to make 25 litres.
Pack size: 1 litre (Box qty 10). Product
code: MTBIO1LT
MICROSEALER - is a concrete dustproofer and hardner. It is a
highly penetrative solution which reacts with hydrated cement, both on the
surface and up to a depth of 15mm.
Pack size: 10 litres. Product code: MICROSEALER
TECHNOCRYL 2001 - Acrylic waterbased dispersion with 50%
active solidas, specially modified to be compatable with cement-based mixes. It
is designed for producing heavy industrial and agricultural floors, bedding
grouts for machinery and repair mortars. It can be used both internally or
externally in areas of continuous or intermittent water contact.
Pack size: 25 litres. Product code: TECH200125L
All these products provide useful solutions to common repair situations in
traditional and modern buildings and are backed up by comprehensive guidance and
advice from the Wykamol Technical department.
